Model No: Michi M8 monoblock amplifier

Availability: 1

Category: Solid State

Michi M8 monoblock amplifier

  • $7,000.00

The stunning control and authoritative power of the Michi M8 Monoblock Amplifier is the result of a perfect balance of science meets art delivering 1,080 watts of Class AB power into 8 ohms and an astounding 1,800 watts to the most demanding 4 ohm loudspeakers. The M8 is powered by a pair of custom engineered, low noise, in-house manufactured toroidal transformers supported by 4 British patented slit foil, high efficiency, low ESR bulk storage capacitors for impactful bass with exceptional control under extreme loading conditions.

To achieve accuracy and its unsurpassed performance, the M8 is equipped with an array of 32 high current output transistors thus reducing the load on individual components and maintaining the crucial energy, rhythm and timing throughout the amplification stages. Musical expression and detailed refinement were further accomplished through acoustic tuning of all critical components and a balanced circuit design.

A high resolution display adorns the front panel supporting a peak power meter or spectrum analyzer. With XLR and RCA inputs, 2 sets of custom Michi speaker binding posts, remote control and fully featured RS232 and Ethernet connections the M8 provides ultimate installation flexibility. Power amplification at its best in the most elegant of industrial designs.

DIMENSIONS (W × H × D)485 × 238 × 465mm 19" × 9.375" × 18.25" FRONT PANEL HEIGHT220mm (8.625") POWER REQUIREMENTS120V, 60Hz POWER CONSUMPTION1200W STANDBY POWER CONSUMPTIONNormal: <0.5WNetwork Wakeup: <2W NET WEIGHT59.1kg (130.3lbs.) BTU RATING (4Ω, 1/8th power)3200 BTU/h

CONTINUOUS POWER OUTPUT1080W/Ch (8Ω)1800W/Ch (4Ω) TOTAL HARMONIC DISTORTION (THD)<0.018% FREQUENCY RESPONSE20Hz - 20kHz (+0dB, -0.15dB)10Hz - 100kHz (+0dB, -0.5dB)  GAINUnbalanced (RCA): 34dBBalanced (XLR): 30dB


The stunning control and authoritative power of the Michi M8 Monoblock Amplifier is the result of a perfect balance of science meets art delivering 1,080 watts of Class AB power into 8 ohms and an astounding 1,800 watts to the most demanding 4 ohm loudspeakers. The M8 is powered by a pair of custom engineered, low noise, in-house manufactured toroidal transformers supported by 4 British patented slit foil, high efficiency, low ESR bulk storage capacitors for impactful bass with exceptional control under extreme loading conditions.

To achieve accuracy and its unsurpassed performance, the M8 is equipped with an array of 32 high current output transistors thus reducing the load on individual components and maintaining the crucial energy, rhythm and timing throughout the amplification stages. Musical expression and detailed refinement were further accomplished through acoustic tuning of all critical components and a balanced circuit design.

A high resolution display adorns the front panel supporting a peak power meter or spectrum analyzer. With XLR and RCA inputs, 2 sets of custom Michi speaker binding posts, remote control and fully featured RS232 and Ethernet connections the M8 provides ultimate installation flexibility. Power amplification at its best in the most elegant of industrial designs.

DIMENSIONS (W × H × D)485 × 238 × 465mm 19" × 9.375" × 18.25" FRONT PANEL HEIGHT220mm (8.625") POWER REQUIREMENTS120V, 60Hz POWER CONSUMPTION1200W STANDBY POWER CONSUMPTIONNormal: <0.5WNetwork Wakeup: <2W NET WEIGHT59.1kg (130.3lbs.) BTU RATING (4Ω, 1/8th power)3200 BTU/h

CONTINUOUS POWER OUTPUT1080W/Ch (8Ω)1800W/Ch (4Ω) TOTAL HARMONIC DISTORTION (THD)<0.018% FREQUENCY RESPONSE20Hz - 20kHz (+0dB, -0.15dB)10Hz - 100kHz (+0dB, -0.5dB)  GAINUnbalanced (RCA): 34dBBalanced (XLR): 30dB

Write a review

Note: HTML is not translated!
    Bad           Good