Model No: ELECTROCOMPANIET ECI 6 Integrated Amplifier

Availability: 1

Category: Integrateds

ELECTROCOMPANIET ECI 6 Integrated Amplifier

  • $4,199.00

Fully balanced integrated amplifier 

The new ECI 6 is a powerful integrated amplifier equipped with a 4 analogue inputs. The ECI 6 offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI-6 with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.

Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI-6 is ready for future expansions. The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top. All to ensure that the ECI 6 will reproduce your favourite music the way it was recorded.


Preamplifier section Input impedance ( Balanced input )47KohmMaximum input level10 Volt RMSNoise floor ( 1Vrms, 20 - 20 kHz, balanced)
-135 dBTHD + N   (1Vrms, 20 - 20 kHz, balanced)    <0.004%Gain (Balanced)0 dB  Amplifier section Output Impedance< 0,02 OhmFrequency response1 – 150 kHzChannel separation> 120 dBTHD ( 20 - 20 kHz)< 0.004%Maximum peak current>100ADamping factor  8 ohm load>350Input sensitivity  120W output1.3VrmsInput sensitivity HT  120W output1VrmsGain HT Inputx36 (31 dB)Rated output power 8 ohms2 x 125 W4 ohms2 x 200 W2 ohms2 x 370 W

Power consumption 110 W Standby1W(no load or signal)   Dimensions Width465 mm / 18.3 inchesDepth405 mm / 16 inchesHeight128 mm / 5 inchesWeight20Kg / 44 lbs.


Fully balanced integrated amplifier 

The new ECI 6 is a powerful integrated amplifier equipped with a 4 analogue inputs. The ECI 6 offers 2 x 125 Watts and is based on the successful ECI 5 MK II. To enhance it, we have equipped the ECI-6 with an even better power supply and a more sophisticated preamplifier module. As a result we can offer you an extremely substantial and dynamic amplifier, capable of controlling a wide range of speakers on the market.

Analogue sources can be connected to one balanced (XLR) input and three single-ended (RCA) stereo inputs. With two preamplifier outputs, one balanced and one single ended, the ECI-6 is ready for future expansions. The input stage is built from discrete circuits running in class A with zero feedback. The output stage runs with moderate amounts of negative feedback, carefully balanced between good bass extension and control, a detailed open midrange and a warm detailed top. All to ensure that the ECI 6 will reproduce your favourite music the way it was recorded.


Preamplifier section Input impedance ( Balanced input )47KohmMaximum input level10 Volt RMSNoise floor ( 1Vrms, 20 - 20 kHz, balanced)
-135 dBTHD + N   (1Vrms, 20 - 20 kHz, balanced)    <0.004%Gain (Balanced)0 dB  Amplifier section Output Impedance< 0,02 OhmFrequency response1 – 150 kHzChannel separation> 120 dBTHD ( 20 - 20 kHz)< 0.004%Maximum peak current>100ADamping factor  8 ohm load>350Input sensitivity  120W output1.3VrmsInput sensitivity HT  120W output1VrmsGain HT Inputx36 (31 dB)Rated output power 8 ohms2 x 125 W4 ohms2 x 200 W2 ohms2 x 370 W

Power consumption 110 W Standby1W(no load or signal)   Dimensions Width465 mm / 18.3 inchesDepth405 mm / 16 inchesHeight128 mm / 5 inchesWeight20Kg / 44 lbs.

Write a review

Note: HTML is not translated!
    Bad           Good