Model No: McIntosh MC500 amplifier

Availability: 1

Category: Pre-Owned Equipment

McIntosh MC500 amplifier

  • $5,000.00

POWER OUTPUT 500 watts per channel into an 8, 4 or 2 ohm load is the minimum sine wave continuous average power output 1000 watts Mono into a 16, 8 or 4 ohm load is the minimum sine wave continuous average power output RATED POWER BAND 20Hz to 20,000Hz TOTAL HARMONIC DISTORTION 0.005% maximum harmonic distortion at any level from 250 milliwatts to rated power output DYNAMIC HEADROOM 2.1dB FREQUENCY RESPONSE + 0, -0.25dB from 20Hz to 20,000Hz + 0, -3.0dB from 10Hz to 100.000Hz INPUT SENSITIVITY 2.2 volts, Stereo Balanced and Unbalanced 2.2 volts, Mono Balanced 3.2 volts, Mono Unbalanced A-WEIGHTED SIGNAL-TO-NOISE RATIO 85dB (115dB below rated output) INTERMODULATION DISTORTION, SMPTE 0.005% maximum if instantaneous peak power output does not exceed twice the output rating WIDE BAND DAMPING FACTOR 200 at 8 ohm output INPUT IMPEDANCE 10,000 ohms POWER GUARD Clipping is prevented and THD does not exceed 2% with up to 14dB overdrive at 1000HZ POWER REQUIREMENTS 120 volts. 50/60Hz, 12 amperes UL/CSA SIZE 17-1/4 inches (43.8cm) W, 10-3/8 inches (26.4cm) H, 20-1/3 inches (51.1cm) D. including front handles WEIGHT 114 pounds (51.7Kg) net, 127 pounds (57.6Kg) shipping

POWER OUTPUT 500 watts per channel into an 8, 4 or 2 ohm load is the minimum sine wave continuous average power output 1000 watts Mono into a 16, 8 or 4 ohm load is the minimum sine wave continuous average power output RATED POWER BAND 20Hz to 20,000Hz TOTAL HARMONIC DISTORTION 0.005% maximum harmonic distortion at any level from 250 milliwatts to rated power output DYNAMIC HEADROOM 2.1dB FREQUENCY RESPONSE + 0, -0.25dB from 20Hz to 20,000Hz + 0, -3.0dB from 10Hz to 100.000Hz INPUT SENSITIVITY 2.2 volts, Stereo Balanced and Unbalanced 2.2 volts, Mono Balanced 3.2 volts, Mono Unbalanced A-WEIGHTED SIGNAL-TO-NOISE RATIO 85dB (115dB below rated output) INTERMODULATION DISTORTION, SMPTE 0.005% maximum if instantaneous peak power output does not exceed twice the output rating WIDE BAND DAMPING FACTOR 200 at 8 ohm output INPUT IMPEDANCE 10,000 ohms POWER GUARD Clipping is prevented and THD does not exceed 2% with up to 14dB overdrive at 1000HZ POWER REQUIREMENTS 120 volts. 50/60Hz, 12 amperes UL/CSA SIZE 17-1/4 inches (43.8cm) W, 10-3/8 inches (26.4cm) H, 20-1/3 inches (51.1cm) D. including front handles WEIGHT 114 pounds (51.7Kg) net, 127 pounds (57.6Kg) shipping

Write a review

Note: HTML is not translated!
    Bad           Good