Model No: Klipsch Palladium F38 speakers

Availability: 1

Category: Pre-Owned Equipment

Klipsch Palladium F38 speakers

  • $8,599.00

As the intermediate floorstander in our high-end luxury Palladium® Series, the P-38F features the flagship P-39F’s technology and gallery-like appearance in a slightly smaller, but equally stunning package. The P-38F’s carbon-infused, thermoset composite dual-horn configuration is unique to the Palladium family. It consists of a proprietary tweeter design, combining a chambered phase plug and Tractrix® Horn for extended high-frequency response; a second 90º by 60º acoustically damped Tractrix Horn is coupled to the midrange driver, resulting in precise performances. The three low-frequency drivers employ 8” hybrid cone woofers, powered by a three-part neodymium magnet structure with dual stabilizing rings. Four ports on the rear of the speaker enhance low-distortion bass response. Each woofer’s voice coil responds accurately to the smallest signal modulation, yet can also handle the high power of the most demanding soundtracks. Designed with an eye toward home interior and furniture designs, the P-38F has a signature style that blends classic Klipsch audio and a clean, contemporary look. Its unique enclosure hints at the power inside, while maintaining a high degree of beauty. Next to its shape, the most striking visual statement is the zebra-grain Linia veneer available in natural, merlot or espresso. The horizontal linear grain and absence of visible fasteners further add to its appeal. 

Merlot finish

SPECIFICATIONS

FREQUENCY RESPONSE 40Hz-24kHz +/-3dB

LOW FREQUENCY EXTENSION 29Hz

HIGH FREQUENCY EXTENSION 30kHz

POWER HANDLING 300W continuous / 1200W peak

RECOMMENDED AMPLIFIER POWER 50 - 750W

SENSITIVITY 98dB @ 2.83V / 1m

NOMINAL IMPEDANCE 4 ohms

MID-FREQUENCY CROSSOVER 550Hz

HIGH FREQUENCY CROSSOVER 3400Hz

MAXIMUM ACOUSTIC OUTPUT 122dB (2 speakers in-room)

HIGH FREQUENCY DRIVER 0.75" (1.9cm) titanium diaphragm compression

driver mated to 90° x 60° Tractrix® Horn

MID-FREQUENCY DRIVER 4.5" (11.4cm) aluminum diaphragm compression

driver mated to 90° x 60° Tractrix® Horn

LOW FREQUENCY DRIVERS Three 8" (20.3cm) high-output, aluminum / Rohacell® /

woven synthetic fiber hybrid cone woofers

ENCLOSURE MATERIAL Constrained layer MDF

(medium density fiberboard)

ENCLOSURE TYPE Bass-reflex via quad rear-firing ports

HEIGHT 50.25" (127.6cm)

WIDTH 10.75" (27.3cm)

(12.75" / 32.4cm at the base)

DEPTH 21.5" (54.6cm)

WEIGHT 122 lbs (55.4kg)



As the intermediate floorstander in our high-end luxury Palladium® Series, the P-38F features the flagship P-39F’s technology and gallery-like appearance in a slightly smaller, but equally stunning package. The P-38F’s carbon-infused, thermoset composite dual-horn configuration is unique to the Palladium family. It consists of a proprietary tweeter design, combining a chambered phase plug and Tractrix® Horn for extended high-frequency response; a second 90º by 60º acoustically damped Tractrix Horn is coupled to the midrange driver, resulting in precise performances. The three low-frequency drivers employ 8” hybrid cone woofers, powered by a three-part neodymium magnet structure with dual stabilizing rings. Four ports on the rear of the speaker enhance low-distortion bass response. Each woofer’s voice coil responds accurately to the smallest signal modulation, yet can also handle the high power of the most demanding soundtracks. Designed with an eye toward home interior and furniture designs, the P-38F has a signature style that blends classic Klipsch audio and a clean, contemporary look. Its unique enclosure hints at the power inside, while maintaining a high degree of beauty. Next to its shape, the most striking visual statement is the zebra-grain Linia veneer available in natural, merlot or espresso. The horizontal linear grain and absence of visible fasteners further add to its appeal. 

Merlot finish

SPECIFICATIONS

FREQUENCY RESPONSE 40Hz-24kHz +/-3dB

LOW FREQUENCY EXTENSION 29Hz

HIGH FREQUENCY EXTENSION 30kHz

POWER HANDLING 300W continuous / 1200W peak

RECOMMENDED AMPLIFIER POWER 50 - 750W

SENSITIVITY 98dB @ 2.83V / 1m

NOMINAL IMPEDANCE 4 ohms

MID-FREQUENCY CROSSOVER 550Hz

HIGH FREQUENCY CROSSOVER 3400Hz

MAXIMUM ACOUSTIC OUTPUT 122dB (2 speakers in-room)

HIGH FREQUENCY DRIVER 0.75" (1.9cm) titanium diaphragm compression

driver mated to 90° x 60° Tractrix® Horn

MID-FREQUENCY DRIVER 4.5" (11.4cm) aluminum diaphragm compression

driver mated to 90° x 60° Tractrix® Horn

LOW FREQUENCY DRIVERS Three 8" (20.3cm) high-output, aluminum / Rohacell® /

woven synthetic fiber hybrid cone woofers

ENCLOSURE MATERIAL Constrained layer MDF

(medium density fiberboard)

ENCLOSURE TYPE Bass-reflex via quad rear-firing ports

HEIGHT 50.25" (127.6cm)

WIDTH 10.75" (27.3cm)

(12.75" / 32.4cm at the base)

DEPTH 21.5" (54.6cm)

WEIGHT 122 lbs (55.4kg)


Write a review

Note: HTML is not translated!
    Bad           Good